The panel furniture is made of some craft work as putting veneer on the surface of the melamine density fiberboard or particleboard. Most of this kind of furniture is the simulation wooden furniture. Now on the market, the veneer face of the panel furniture is more realistic, and the gloss and the feel are also very nice. But the products with the refined craft are still very expensive.

 

The hackneyed man-made boards are the plywood, joiner board, particle board, MDF, etc. The plywood (splint) commonly is used in the furniture which needs for deformation; the capability may be affected by the quality of core material; the material of the particle board (also called corpuscle board or bagasse board) is very loose, so the particle board is only used for low grade furniture. The most commonly used with cost-effective is MDF (melamine density fiberboard). The familiar decorative materials are the veneer (commonly known as wood skin with sticked suffer-fine), the grainy paper (commonly known as stickers), PVC sheet, Polyester lacquer surface (known as stoving varnish), etc. The last materials normally are used in the top grade furniture, while the natural veneer is used in high grade furniture. The panel furniture is made of some craft work as putting veneer on the surface of the melamine density fiberboard or particleboard. Most of the panel furniture is the simulation wood furniture. Now on the market, the veneer face of the panel furniture is more realistic, and the gloss and the feel are also very nice. But the products with the refined craft are still very expensive. The ideal space of the third floor in Lize shop is the sticked wood skin, while Jia Hao Ho is sticker.

 

How to choose the panel furniture?

 

The easiest way to distinguish the veneer materials of the panel furniture is to observe the pattern. The stickup wood surface has the natural scar, color and patterns change. And for more, there will be different feel with your hands on the face of the board. The sealed edge of the furniture is very important. You should pay attention to the quality of the materials of the sealed edge and whether there are irregular or bosomy or not. In particular, you should note that if it is sealed at all six edges. Because the man-made board will have the volatile gases more or less in the producing, although the factory uses the bond without formaldehyde. The tight edge will not harm to the natural environmental protection of the room. And you should note the firm level of the furniture. The first is the gap of the crack between a door and its frame and drawer joints. If there is big gap, you can see the rough work and the furniture will be out of shape with the going of the time. The second point is you should note whether it is a single package or dual package. Usually, besides of the outer board, there is still a board inside and this is dual package which is beautiful and strong. You should also note the quality of the paint, the traces of the color, the thickness of the color on the edges and if there are gap and air bladder. Meanwhile you should ask the sales staff how many paints on the furniture. Of course the better they paint. The best way to know the material board of the panel furniture is MDF or shaving board from the hinge groove and the drilling hole is to observe the hinge groove and the drilling hole where bare the inner structure. The biggest advantage of the panel furniture is you can knock down your furniture as your wish with the use of the hardware. So there is a close relationship between the qualities of the joints and the quality of the furniture. That is the reason that the price of the import furniture is very high.